There are 3 ways for the laser marking machine to draw the marking content:

The first way: directly open the file whose file format is .ezd;

The second way: import file; (common vector text formats are .ai, .dxf, .plt);

The third way: draw directly in the marking software.

Today, Foshan Fulan Laser mainly talks about: how to import marking files

Step 1: After opening the marking software, click "File" in the upper left corner of the main page

Step 2: In the "File" drop-down box, find and click "Input Vector File"

Step 3: Find the file to be marked and click "Open"

Step 4: The marking content is imported

Step 5: After the file content is imported, we need to click the tool icon as shown in the figure below to center the content

Step 6: If you need to fill in (normally, you need to fill in), click the tool icon with the word "H"

After clicking the word "H", the window as shown in the figure below will pop up, adjust the "Line Spacing" to 0.05mm, and then click "OK"

Click "OK"

Click "F2" on the toolbar at the bottom of the software, or press "F2" on the keyboard, or step on the foot switch to mark