Can a laser marking machine cut materials?

It can be used for cutting, but it can only cut thinner materials. If it is to be used for cutting, Foshan Fulan Laser still recommends that you use a dedicated laser cutting machine.

Because the power of the marking machine is not as high as that of the laser cutting machine, after all, it is not a special equipment for cutting. If you have to cut thick materials, it can only be said that the speed is very, very, very slow, and the effect is not very good. For example, using a laser marking machine to cut metal, the marking is very simple, and the effect is very good, and the efficiency is also high; but for cutting, if the material is thin and the precision is not high, the effect and efficiency are OK, but if it is a thick material If it is necessary to repeat the marking N times at a fixed point to cut through (for example: 1mm thick stainless steel, cutting a circle with a diameter of 20mm, it takes about 50 minutes), and there will be a taper. So if you want to do cutting, I still recommend a laser cutting machine.