10 watts, 20 watts, 30 watts, and 50 watts refer to the power of the fiber laser marking machine laser. There is no difference from the appearance of the machine. It depends on the laser used and the related configuration. So how can you see the power of the laser? ——Each laser equipment produced by Foshan Fulan Laser has its parameters marked. You can know the power of the laser directly by looking at the nameplate; or test it with a power meter; or use a metal workpiece to use these 4 powers respectively Marking, 10 watts can't hit a depth, the depth can be 20 watts, and so on, the deeper the power, the greater the power.

general speaking:

①, the greater the power, the greater the marking range, the deeper the marking, the faster the speed when the same workpiece is hit;

②, the use of high power can be adjusted to low power, but low power can not be adjusted to high power;

③ Different power prices are different, the higher the power, the higher the price.

Some materials can only use 20W power to produce perfect results, and 30W power can not produce perfect effects. And some materials can only use 30W power to play a perfect effect, with 20W can not play the effect. A 30W laser can be adjusted to 20W for use; 20W cannot be used for 30W. If the product you hit later needs 30W to produce the desired effect, it cannot meet the requirements. The reason is that the maximum power of your own laser is only 20w, which can not be modified.

Fulan Laser recommends that when you purchase a machine, you must consider the long-term development of the company and clarify the needs of your own products. For example, in the later period, the depth of marking is required to be higher, the speed is required to be faster, and the size of the marking is required to be greater, etc. , You need to choose a marking machine with higher power.

Foshan Fulan Laser recommends equipment to customers based on user needs and development prospects. To meet the needs of users and solve problems is the original purpose of Foshan Fulan Laser, and then profit. After all, serving users is the premise of profit for manufacturers.