Signs are also called nameplates and nameplates. Laser engraving is laser engraving, laser marking, laser marking, etc.

Engraving on wooden products (wood: according to the material classification can be divided into two categories: solid wood board and artificial board; according to the molding classification can be divided into large core board, bamboo puzzle board, density fiberboard, veneer, fine core board, finger-joined board , Melamine board, waterproof board, gypsum board, cement board, baking varnish board, particle board, etc.), the carbon dioxide laser marking machine is used, because the wavelength of the carbon dioxide laser is 10.64um, the reflectivity is low, and the absorptivity of non-metallic materials is particularly Good, so the carbon dioxide laser marking machine is mainly used for marking non-metallic materials, such as: acrylic, leather, rubber, wood, plastic, bamboo products, plexiglass, plastic, cloth, ceramic products and other non-metallic materials.

The use of laser marking machine for engraving processing on wood has the following advantages:

1. Marking permanence: Laser marking is essentially a "destructive removal" process. The marked mark is not easy to imitate and change, and the mark will not be affected by the environment (touch, acid and alkaline gas, high temperature, Low temperature, etc.) and subside.

2. Non-contact processing: laser marking is processed by a non-mechanical "light knife", the workpiece will not generate internal stress after engraving, and the original accuracy of the workpiece is guaranteed.

3. High marking accuracy: The carbon dioxide laser marking machine produced by Fulan Laser has a minimum line width of 0.1mm, and the markings on wood products are beautiful and delicate, with a fine and clear marking.

4. Wide application range: It can be engraved on many non-metallic materials.

5. Low operating cost: The laser marking machine can mark in one step, with fast marking speed and low energy consumption, without the need for consumables.

6. High processing efficiency: The laser marking machine is controlled by an industrial computer. The laser beam under computer control can move at a high speed, and the marking process can be completed within a few seconds. For example, when marking wooden signs, conventionally marking 30 characters in 12-point font, the marking can be completed in 3 seconds (this is not the fastest marking speed).

7. Fast editing and development speed: processing immediately, marking any content and editing at will, the combination of laser technology and computer technology, all the information to be marked is edited in real time by the computer, as long as it is programmed on the computer Realize laser printing output, and can change the content and depth of marking design manuscript at any time.

8. Flexible configuration: it can meet the requirements of small batch or single processing, and also meet the requirements of industrialized assembly line for mass production.

9. Consistent effect: Ensure that the processing effect of different batches of the same product is completely consistent.

10. Can freely control the depth of engraving.

The laser marking machines developed and produced by Foshan Fulan Technology Co., Ltd. are classified according to lasers. They mainly include: carbon dioxide laser marking machine, semiconductor laser marking machine, fiber laser marking machine, green laser marking machine, ultraviolet laser marking machine Marking machine and MOPA laser marking machine. The laser beams emitted by different lasers will react differently to different materials, so different types of laser marking machines are suitable for different materials and marking effects. Fulan Laser will give customers free samples before purchasing the machine. , To select the most suitable laser marking machine for customers.